LETTER OF INTENT (LOI)    
   
We are searching for scrap metal in large and steady supply.  If you have and are able to supply please contact us with pictures and details of your product.  
   
 
Quantity:  10,000 Metric Tones per month  Or MORE  
 
Contract:  One year  
   
Port:          India  
   
Price:                                         Dollars per Metric Tone ($                         Per MT (CIF)    
   
Shipment Mode:  Cost, Insurance & Freight (CIF) Insurance will be irrevocable and                   in favor of Global 1 Traders Inc.                                                            
 
 Shipment:  Supply must be in 20 MT per container.  
   
Size:            Have to be cut to 4 feet or less.  
 
Weight:      Per piece should not be more than 100 kg.  
   
Steel scrap defined as HMS1and 2 in an 80/20 mix.  
   
Unacceptable Materials List:  
The following is a list of items that we either cannot accept or requires special handling. This list should not be considered as all-inclusive.  If you have any item which may be in question, please contact us.    
 
Non-Metal total 1% or less, no radiation, arms, ammunition, bombs, shells, mines, sealed gas cylinders, copper attachments, free from gas and chemicals.  Free from any radioactive materials, any harmful chemicals substances and coatings, any organic waste and any other harmful substances.  Ordinance Scrap.  Dirt, dust, rust, fluff and other impurities not allowed over 1%.  
   
Any closed containers that are under pressure. i.e.  
- Propane/Gas Cylinders, Fire Extinguishers, CO2 Bottles & Oxygen Bottles, Aerosol Cans,  
- Any containers that contain or have contained: Oil, Diesel Fuel, Paint, Toxic or Hazardous Waste, or any other questionable or un-certifiable material.  
   
Automobiles/Motor Vehicles/Heavy Equipments, Those that are not prepared.  
- Prepared vehicles have had the tires and all fluids removed. Refrigerant gas must be removed from air conditioning units in accordance with all applicable Federal, Provincial and local laws and regulations. Vehicles will be free of household and general garbage.  
- Fuel tanks must be removed from the vehicle. The tanks are acceptable if clean and split in half.  
Batteries are not to be included in scrap metal containers.  
Ballasts from electrical light fixtures must be removed from fixtures.  
- We do not accept ballasts.  
Computer monitors, keyboards, printers & Televisions are not accepted.  
Dry cleaning equipment will only be accepted if all tanks have been dismantled and cut open.  
- All lines must be cut to ensure that no dry cleaning fluids are contained in this scrap.  
Household or general garbage included in scrap metal are not accepted.  
Liquids: Water, Oil, Paint, Fuel, Chemicals etc. are not accepted.  
Oil Filters are not accepted.  
Paint cans are only acceptable with lids off, brushed, scraped or wiped clean on the inside (no paint residue) and with the paper label removed.  
Refrigerators and Freezers are not accepted.  
We do not accept any styles of cooling units nor any units containing sulfur-dioxide.  
It is Global 1 Traders Inc. option to reject a material that does not meet acceptable or Quality requirements.  
It is the option of Global 1 Traders to either return the material that does not meet the acceptable criteria or to deduct the weight from the load and /or apply a handling charge for that material.  
It is Seller’s responsibility to deliver the supply free of all the encumbrances.  
 
Global 1 Traders Inc  
5936-Fraser St,  
Vancouver,B.C  
Canada V5W 2Z7  
 
604-321-7300  
Mr. Sandhu  
Director  
E-mail:rubdata@gmail.com      and    E-mail:rubdata@yahoo.com  
 
 
 

 we require huge quantities of used rails C & F  
Mumbai, India.Pl. send your rates.  
Regards

 Sir.. we are manufacturers and exporters of FIBC Bags in INDIA.  Please contact me for your requirments at E-mail:balasubramaniam@buildmetfibres.in

 We have a serious Middle Eastern buyer looking for used rail R50-R65 cut to 1.5 meters . Buyer will deal direct with seller are you the direct seller not a mandate or trader qty approx 750,000 MT. Buyer will not travel to SA what then would be your proceedure. We are at present waiting for buyer feed back on dealing with SA. If buyer agreeable all bussiness will be formal by LC and Contracts. We will also need agreements in place before buyer is put in contact with direct seller.

 Good Sir ,  
   
Thanks for your kindly mail that was received with many thanks and understanding,    
 we are sending you this reply, based on the transactions below :  
   
FOB : ASWP : Price : $130.00 per metric ton,  to any worldwide sea port,  
Used Rail-R50, R65  
R50-R60: USED RAIL STEEL SCRAP IS SUITABLE FOR RE-ROLLING INTO BARS AND SHAPES. FREE FROM BENT TWISTED RAILS. FROGS, SWITCHES, AND GUARD RAILS, OR RAILS WITH SPLIT RAIL.  
   
R65: USED LONG RAIL STEEL SCRAP (Uncut  Rail  direct from Benin Railway Road) OR IN LENGTHS FROM  any meters TO  ON A PER BAR BASIS, SUITABLE FOR RE-ROLLING AND INTO BARS AND SHAPES. FREE FROM BENT AND TWISTED RAILS, FROGS, SWITCHES, AND GUARD RAILS, OR RAILS WITH SPLIT RAIL.  
   
Origin: BENIN  AFRICA  
Packing: Bulk  Order; at the buyers needed Quantity per months and  for the complete one year contract  
FOB : ASWP : Price : $130.00 per metric ton,  to any worldwide sea port,  
 Cutting Charges  pay by the buyer direct to the cutting company , $10.00 PER TON CHARGE..  
THE COST:FOB  $130.00 per MT  to any  Quantity  metric tons for a 12 month contract,  metric tons per 12– Sold only with a 1 year contract.  
   
METAL PROCEDURES:  
---------------------------  
1. Buyer sends LOI  
2. Seller sends a draft contract with full details. And FCO.  
3. Buyer returns signed draft contract (with amendments if required)  
4. PAYMENT TREMS: wire transfer T/T 100% with international bank guarantee  
5. Seller signs contract (with amendments if required) and returns the signed contract to buyer  
6. Vessel is nominated within 5-7 days after the both parties  have  the contract is well signed for the both parties  
7. Loading and shipment begins within 3 days from confirmations after the date of signing contract  and legalized in the seller Ministry of justice  Benin Buy the buyer.  
8. A visit to the yard can be arranged.  
9. The Import have a very right to visit for the laoding of the goods in the port of the seller.  
12. Any SGS inspection fees and Certificate Bone  by the seller,  
13. The Charges  for the cutting bone by the buyer; $ 10.00 per metric ton.  
14. payments  for the cutting  will not be paid to the seller  Bank Account , but the cutting company bank account direct from the buyer .  
15. No price should add with  Cutting Charges .  
   
16. Insurance , SGS, Inspections Report,  Certificate of Origin, Certificate or ownership, loading Charges , transportation, Certificate of quantity, Certificate Of Quanlty  all the fees will be Bone by the seller,  
Below here is the chemical composition of the rails. Commodity: used Rails:  
   
           
We  will be waiting for your reply,  
   
Mr George Mark  
CEO.  
GEORGEMARK BENIN SARL  
14/15 JERICHO COTONOU  
BENIN REPUBLIC  
WEST AFRICA  
TELEPHONE +22998907692  

 we are in the market for 30000 tons x 12  
maximum length should be 1450 - 1500 mm  
price as CIF Izmir - Turkey  
please send offer.

 Dear Sir,  
 
We would like to purchase Uesd rails tracks scarp.  
 
Please quote your best price CIF/Yangon for minimum and maximum order quantity urgently.  
 
Regards,  
Sonny

 Dear Sir,  
 
We would like to purchase Uesd rails tracks scarp.  
 
Please quote your best price CIF/Yangon for minimum and maximum order quantity urgently.  
 
Regards,  
Sonny